System Settings; Equalizer; Network; Network Wizard - Albrecht Audio DR 895 CD Manual

14. System Settings

To select System settings press and hold MENU move to System settings and confirm with OK.

14.1. Equalizer

EN
Several preset EQ modes are available: Normal, Flat, Jazz,
Rock, Movie, Classic, Pop and News.
Also a user-defined setting is available; create your own EQ with
custom bass, treble settings.
Press EQ at the remote control to open the Equalizer, every next
press of EQ moves to the next EQ mode and you can hear it
immediately. To confirm the EQ Mode press OK.
Default setting is Normal.

14.2. Network

14.2.1. Network Wizard

Enter to search AP SSID, then input the WEP / WPA key or choose Push Button/Pin/Skip WPS to
connect to the wireless network.
1. Scanning for networks
DR 895 CD is compatible with all common network protocols and encryption methods. It searches
for the available networks and lists them so you can choose your desired network.
These networks support WPS functionality which eases the connection to this network. For more
information see next page.
If you network does not support WPS functionality you will be asked your network`s encyption key
in the next step. If it does support WPS you will be asked to choose between the WPS methods
"Push button" or "PIN". Or you can skip WPS in order to enter your encyption key.
2. Standard encrypted network
To enter the network's key, use the navigation knob or direction
keys on the remote control to move the cursor through the
characters and press the knob or OK (SCAN) on the remote
control to confirm. As each character is selected, the key is built up
near the top of the display.
To select "Backspace" (BKSP), "OK" or "Cancel" with the
navigation knob turn the selection to "0" and then turn the knob
further backwards.
3. WPS encrypted network
WPS Setup
WPS encrypted networks are identified by [WPS] at the start
of the network name. Use one of the following methods of
Push WPS button
connection:
at the other end
• Push button
DR 895 CD prompts you to press the connect button on the
router. It then scans for a ready Push Button network and
connects.
Press SELECT to continue
38 English