Cleaning And Maintenance; Cleaning Preparations - Elpress DZW-HDT Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 61
Instruction
EN
Hand dryer
-
Insert both hands into the openings.
-
The sensors activate the hand dryer.
Hand disinfection*
-
Insert both hands into the openings in
order to activate hand disinfection.
-
Keep both hands in the openings until
the red lamp turns green. If one or
both hands are prematurely removed
from the openings, disinfection will
stop and the lamp will remain red.
Turnstile*
-
After your hands have been disinfec-
ted, you have ten seconds in which to
pass through the turnstile. If you take
longer than this, the turnstile will lock
and the whole processes must be re-
started.
-
The turnstile locks automatically after
you pass through it.
9
9.1

Cleaning preparations

14
* Time settings are to be adjusted to your preference. See: Technical documentation:
Changing settings.
Instruction table (2/2)
DZW-
DZD-
SANI-
SANI-
HDT
HDT
CARE-
CARE-
B
D
* Time settings are to be adjusted to your preference. See: Technical documentation:
Changing settings.

Cleaning and maintenance

The control panel of the installation may never be cleaned with a jet of
liquid (e.g. garden hose or high-pressure cleaner). This could lead to
irreversible damage being caused to the installation.
The following points are important for cleaning the installation:
Switch off the main switch
Lift the brush grid.
DZW / DZW-HDT / SANICARE-B / SANICARE-DYSON-B / COMBI-BB/
BD / SANICARE-DYSON-COMBI / SANICARE–TAP–B
SANI-
SANI-
COMBI
COMBI
CARE-
CARE-
-BB
-BD
DYSO
DYSO
N-B
N-D
.
w
SANI-
SANI-
CARE-
CARE-
DYSO
TAP-B
N-
COMBI
2021-10-20
Tabla de contenido
loading

Este manual también es adecuado para:

Dzd-hdtSanicare-bSanicare-dSanicare-dyson-bSanicare-dyson-d

Tabla de contenido