Copyright; Before You Start; The Right Place For Mounting - LIVARNO LUX LSLB 100 A1 Manual De Instrucciones E Indicaciones De Seguridad

LIVARNO LUX LSLB 100 A1
possible device fire. If you do inadvertently inhale smoke, seek
medical attention. Smoke inhalation can be damaging to your
health.
WARNING! Never use optical instruments such as a
magnifying glass to look directly into the beam. This could
damage your eyes. If you suspect you have damaged your
eyes, seek medical attention.
CAUTION! Do not hang anything from the LED emitter (1).
The housing is not designed to support weights. This could
damage the LED emitter (1).

5. Copyright

All the contents of this user manual are protected by copyright and provided to the reader for information
only. Copying data and information without the prior explicit written consent of the author is strictly
forbidden. This also applies to any commercial use of the contents and information. All texts and diagrams
are up-to-date as of the date of printing. Subject to change without notice.

6. Before you start

Remove the LED emitter (1) and fitting materials from the packaging.
Check the LED emitter (1) for damage. If the LED emitter (1) is damaged, do not use it.
If the delivery is damaged or incomplete, please contact the manufacturer's customer services.

6.1 The right place for mounting

Select a location carefully and prepare well before mounting.
 Arrange all the individual parts, tools required and fittings tidily so everything is ready to hand.
 The LED emitter (1) must only be mounted on stable surfaces such as walls.
 The power supply must be via the building's electrical circuit.
 Do not mount the LED emitter (1) above a heat source or in the immediate vicinity of other light
sources. When choosing the right place for mounting, please also note the illustrations [D and E] on
the cover page.
 Select the location so that the LED emitter (1) is protected from wind, rain and dirt.
 Find out in advance what fittings are suitable for the location you have chosen. Suitable fittings for
mounting the LED emitter (1) on concrete are provided.
24 - English