Black 9/16" Large Head Screw - Sauder Soft Modern Serie Instrucciones De Montaje

Step 7
Unfold the BACK (N) and lay the BACKS (L, N, O, P, Q,
å
and R) over your unit.
Make equal margins along all four edges of the BACKS.
å
Push on opposite corners of your unit if needed to make it
"square". The BACKS (L and R) will overhang toward the
bottom of the unit.
Fasten the BACKS (L, N, O, P, Q, and R) to the unit. Use twenty-
å
seven BLACK 9/16" LARGE HEAD SCREWS (1S) into the holes
in the ENDS (A, B, C, and F) and UPRIGHTS (D and E).
NOTE: Do not turn SCREWS into the seven overlapping holes
å
in the BACKS (L, P, and R) at this time.
These holes
must be here.
N
This edge is even with the top of the SHELF.
Page 10
The BACKS are reversible. Your
desired color should be facing the fl oor.
The holes in the backs must
line up over the holes in the
ENDS and UPRIGHTS.
P
O
Q
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
L
R
C
A
415594

BLACK 9/16" LARGE HEAD SCREW

(27 used in this step)
Do not turn screws into these seven holes at this time.
P
F
D
E
www.sauder.com/services
1S
B