Idiomas disponibles
Idiomas disponibles
2
Memory Card Retainer for PanelView Terminals (2711-NMCC, -NMCD, -NMCE)
Memory Card Retainer
for PanelView Terminals
(2711-NMCC, -NMCD, -NMCE)
The memory card retainer is required for UL508 installations with a
memory card installed. The retainer protects against Electrostatic Discharge
(ESD) up to 15KV and prevents accidental removal of a memory card in
high vibration environments.
• Use Catalog No. 2711-NMCD for PanelView 550 touch-only terminals.
• Use Catalog No. 2711-NMCE for Panelview 600 touch-only terminals.
• Use Catalog No. 2711-NMCC for all other PanelView terminals except
the PanelView 1400.
To attach the memory card retainer:
Retainer Base
Memory Card
Retainer
Base
Mounting Screws
PanelView 600 shown, others are similar
1. Secure the base of the retainer over the existing memory card slot using
the two screws provided. Tighten the screws to a torque of 6 to 8
·
inch-lbs. (.7 to .9 N
m).
2. Insert the memory card and install the retainer.
3. To remove the retainer, press the tabs on each side and pull.
