Tabla de contenido
Descripción del evento
Se recoge la descripción completa del evento. Cuando es posible, dependiendo del evento, se indican
parámetros añadidos.
En el caso de un evento de diagnóstico, se añade también un código de error interno, útil a efectos de
depuración. Si se borra el evento de diagnóstico, la etiqueta «(Disappearing)» aparece como parámetro adicional.
Ejemplos
Detection access (field #3, 1300 mm/40°)
System configuration #15
CAN ERROR (Code: 0x0010)
CAN ERROR (disappearing)
7.2.5 Ejemplo de archivo de registro
Registro de eventos de ISC NID UP304 actualizado el día 2020/11/18 16:59:56
[Section 1 - Event logs]
380
2020/11/18 16:53:49
375
2020/11/18 16:53:44
356
2020/11/18 16:53:25
30
2020/11/18 16:53:52
27
2020/11/18 16:47:56
5
2020/11/18 16:47:30
0
2020/11/18 16:47:25
0
2020/11/18 16:47:25
92
Rel. 0 d 00:01:32
90
Rel. 0 d 00:01:30
70
Rel. 0 d 00:01:10
61
Rel. 0 d 00:01:01
0
Rel. 0 d 00:00:00
0
0 d 00:00:00
[INFO]
[Section 2 - Diagnostic events log]
380
Rel. 0 d 00:06:20
375
Rel. 0 d 00:06:15
356
Rel. 0 d 00:05:56
30
Rel. 0 d 00:00:30
27
Rel. 0 d 00:00:27
5
Rel. 0 d 00:00:05
SBV System Series | Manual de instrucciones v1.1 SEP 2021| SAF-UM-SBVBus-es-v1.1 | © 2021 Inxpect SpA
COMMUNICATION LOST
[ERROR]
SENSOR#1
[ERROR]
SENSOR#1
[INFO]
CONTROL UNIT
[ERROR]
SENSOR#1
[ERROR]
SENSOR#1
[ERROR]
SENSOR#1
[INFO]
CONTROL UNIT
[INFO]
CONTROL UNIT
[INFO]
CONTROL UNIT
[INFO]
CONTROL UNIT
[INFO]
SENSOR#1
[INFO]
SENSOR#1
[INFO]
CONTROL UNIT
CONTROL UNIT
System Boot #61
[ERROR]
SENSOR #1
[ERROR]
SENSOR #1
[INFO]
CONTROL UNIT
[ERROR]
SENSOR #1
[ERROR]
SENSOR #1
[ERROR]
SENSOR #1
CAN ERROR (Disappearing)
CAN ERROR (Code: 0x0010)
System configuration #16
ACCELEROMETER ERROR (Disappearing)
ACCELEROMETER ERROR (Code: 0x0010)
Signal error (Code: 0x0012)
Dynamic configuration #1
System Boot #60
Detection exit (field #2)
Detection exit (field #1)
Detection access (field #2, 3100 mm/20°)
Detection access (field #1, 1200 mm/30°)
Dynamic configuration #1
CAN ERROR
(Disappearing)
CAN ERROR (Code: 0x0010)
System configuration #16
ACCELEROMETER ERROR
ACCELEROMETER ERROR (Code: 0x0012)
Signal error (Code: 0x0014)
7. Mantenimiento y resolución de fallos
COMMUNICATION LOST
TILT ANGLE ERROR
MASKING
COMMUNICATION LOST
(Disappearing)
TILT ANGLE ERROR
MASKING
69
Tabla de contenido
