Iluminarc LOGIC MR16 DN S Guía De Referencia Rápida página 3

DC Power
This product is powered by the LOGIC DRIVE 2X via the LOGIC POE X with a CAT6 connection of 52 VDC. Download
the User Manual for the LOGIC DRIVE 2X and the Quick Reference Guide for the LOGIC POE X from
www.iluminarc.com for more details.
Power Linking
You can link up to 9 LOGIC MR16 DN S products from each output of the LOGIC POE X. A POE injector must be used to
power products connected to the THRU port of the LOGIC POE X.
Signal Linking
The LOGIC MR16 DN S will receive a control signal (DMX, RDM, Art-Net™, or sACN) from the LOGIC DRIVE 2X via the
LOGIC POE X with a CAT6 connection.
Connecting and Cabling
The LOGIC MR16 DN S has an IN port and an OUT port which require a CAT6 ethernet connection.
IN
Between LOGIC DRIVE 2X and LOGIC POE X:
Short cables may use a smaller gauge, but any cable longer than 50 ft (15 m) must be 23 AWG and shielded, or the
products may not receive enough power.
Cable requirements: Max/Min gauge of 23/28 AWG CAT6 4 twisted pair.
• For distances less than 50 ft (15 m): 23-28 AWG (shielded or unshielded)
• For distances from 50-328 ft (15-100 m): 23 AWG (shielded)
OUTPUT Port
The OUTPUT port of the LOGIC POE X allows up to 75 ft (23 m) of total cabling between the LOGIC POE X and the final
LOGIC MR16 DN S in the chain. These cables can be 23-28 AWG (shielded or unshielded).
THRU Port
The THRU port of the LOGIC POE X only passes the control signal from the LOGIC DRIVE 2X, no power. A POE injector
must be used BEFORE the first LOGIC product in the chain to power it and further products connected to this port.
LOGIC DRIVE 2X
LOGIC MR16 DN S QRG Rev. 3
QUICK REFERENCE GUIDE
OUT
LOGIC MR16 DN S
INPUT
A POE injector must be
used between the THRU
port of the LOGIC POE X
and the first connected
LOGIC product
POE injector
LOGIC product
LOGIC POE X
THRU OUTPUT
LOGIC MR16 DN S
LOGIC MR16 DN S
LOGIC MR16 DN S
LOGIC MR16 DN S
LOGIC MR16 DN S
LOGIC MR16 DN S
LOGIC MR16 DN S
LOGIC MR16 DN S
LOGIC MR16 DN S
LOGIC DRIVE 2X
LOGIC POE X
Up to 75 ft (23 m) of
total cabling
between the
OUTPUT port of the
LOGIC POE X and
the final
LOGIC MR16 DN S
in the chain
EN
2