NuWave OXYPURE ZERO Manual Del Propietário página 15

Press AUTO and hold for 2 seconds again to deactivate Eco mode. Once
Eco mode is off, the Power light will turn back to green and the OxyPure
will return to its previous setting.
Turbo Mode
Turbo mode allows you to run the unit at the highest fan speed for a set
length of time: 30 Minutes, 1 hour, or 2 hours. When used with other
modes, Turbo mode has priority.
Turn on the OxyPure and press TURBO as follows:
1. Once to run at top fan speed for 30 minutes,
2. Twice to run at top fan speed for 1 hour, and
3. Three times to run at top fan speed for 2 hours.
If no other button is pressed after TURBO, then the OxyPure will go to
Fan Speed 1 after the set time.
Turbo + Auto Modes
Press TURBO and then AUTO: The OxyPure will run in Turbo mode for
30 minutes and then Auto mode until changed.
Note: If more time in Turbo is desired, press TURBO until that amount
of time is reached.
Turbo + Timer
1. When Turbo mode is running, the user may set the running time up
to 12 hours by pressing TIMER.
2. If you press TURBO once, the OxyPure will run for 30 minutes;
twice, and it will run for 1 hour; and three times, and it will run for
2 hours. The OxyPure will operate under Turbo mode first for the
selected time. It will then continue to run for the time specified on
the Timer. After that, it will go on the next mode or function.
Sleep Mode
When in Sleep mode, the LED lights on the control panel will be off, but
the fan will still be active. Adjust the fan speed to your preference prior
to going into Sleep mode.
1. Manually adjust the Fan Speed with the FAN SPEED button.
2. Press and hold FAN SPEED for 2 seconds to activate Sleep mode.
3. To turn off Sleep mode, press any button.
nuwavenow.com
15