Compaq 5017 Manual Del Usuario página 5

Avoid unstable mounting: Do not place a monitor with an
unstable base or a monitor heavier than 55 pounds (25 kilograms)
on top of a monitor support cover. Instead, place the monitor on a
work surface next to the docking base.
Use product with approved equipment: This product should be
used only with the Compaq computers and options identified as
suitable for use with your equipment.
Allow product to cool: Allow the product to cool before
removing covers and touching internal components.
Adjust the volume: Turn down the volume before using
headphones or other audio devices.
Safety Precautions for Power Cords and Accessories
Use the correct external power source: A product should be
operated only from the type of power source indicated on the
electrical ratings label. If you are not sure of the type of power
source required, consult your Compaq authorized service
provider or local power company. For a product that operates
from battery power or other sources, refer to the operating
instructions that are included with the product.
Select the correct voltage: Ensure that the voltage select switch
is in the correct position for the type of voltage you use (115 VAC
or 230 VAC).
Use an approved power cord: If you have not been provided
with a power cord for your product, you should purchase a power
cord that is approved for use in your country.
The power cord must be rated for the product and for the voltage
and current marked on the product's electrical ratings label. The
voltage and current rating of the cord should be greater than the
voltage and current rating marked on the product. In addition, the
diameter of the wire must be a minimum of 0.75 mm2/18AWG
and the cord should be between 5 and 6.5 feet (1.5 and 2 meters)
long. If you have questions about the type of power cord to use,
contact your Compaq authorized service provider.
User's Guide
All manuals and user guides at all-guides.com
3