CLEANING / MAINTENANCE
1.- Always switch off and unplug the machine before cleaning, repairing or maintaining it.
Wait until the inside has cooled down.
2.- Never used chemical or abrasive products. Do not use a brush or other utensil that could
damage the different parts and surfaces.
3.- Use a damp cloth with detergent for cleaning and then dry it.
Do not place the machine directly in the container with water. The machine is not
!
submersible
4.- We recommend changing the adhesive paper if 2/3 parts of the surface area is covered with
insects. Bear in mind that the useful life of each paper is approximately 3 months. During the
summer months or during times when there are more insects, it is advisable to change the
paper every 10 days to maintain optimum performance from the device.
5.- To change the adhesive paper, follow the instructions which feature in the operation section.
Remove the old adhesive paper before fixing the new adhesive paper.
6.- We recommend changing the bulbs every 6 months or when one of the 2 bulbs stops working.
7.- Unplug the appliance to change the light bulbs and let them cool completely.
Open the lid as indicated in point 2 of the operating section.
8.- Hold the bulb at both ends and turn it through 90 degrees towards you. You can remove the
bulb easily (Image 1).
9.- Replace the old bulb with a new one, inserting its terminals through the aperture support
opening and then turn the bulb through 90 degrees (Image 1)
!
Make sure the new bulb is compatible with the device
1
38