Main Technology Specifications - Aigostar 8433325504250 Manual Del Propietário

GB
WARNING: Risk of fire. Do not operate heater without wheel assemblies
attached. Operate heater in upright position only (wheels on bottom, controls
on top). Any other position could create a hazardous situation. Ensure that the
surface beneath the heater is clean and free of any obstructions. It is not
recommended that this heater be placed on
high-pile carpeting or any other surface that impedes the flow of air
underneath the heater.
This heater include an a visual alarm to warn that parts of the heater are
getting excessively hot. If the alarm flashes, immediately turn the heater off
and inspect for any objects on or adjacent to the heater that may cause high
temperatures. DO NOT OPERATE THE HEATER WITH THE
ALARM FLASHING.
OPERATING INSTRUCTION
1. Insert the plug into the suitable wall outlet.
1) Never use the unit in place where is not even, make sure there is nothing flammable or easy deform
object within 1 meter (36 inches).
2) Insert the plug after setting the thermostat to "MIN" position and setting the power selected switches
to "OFF" position.
3) Do not cover the unit.
4) The heater is suitable for operation on an A.C. electricity supply having the same voltage as that show
on its rating label.
2. Rotate power switch to the "Max" position then turn thermostat to the "high" position, at this moment,
the unit begins to work, when the temperature rises to which you are satisfied with, slowly turn the
thermostat counter clockwise until the indicating light of the key for power choice is out, and the room
temperature thus can keep constant. If you want to raise or lower the room temperature, you can make
another regulation: Turn the thermostat clockwise to raise the temperature and counterclockwise to lower
it, or press only one shift of power switches to "ON" position.
3. Turbo function
Press the switch to "ON" position, the fan heater begins to work separately and used as a fan heater. The
temperature in the room will rise rapidly.
NOTES:
1) The pilot lamp will be on only if the temperature is below the setting value of the thermostat.
2) The room must be sealed in good condition, if not, it will not make good result because of the influx of
heat.
3) The outlets of the control chamber must be kept ventilative, if not, undue move of the thermostat may
occur.
4) After use, turn the power switch to the "OFF" position first, then turn the thermostat to the "MIN"
position, and pull out the power supply plug.
GB-05
All manuals and user guides at all-guides.com
SAFTEY FEATURES
Thermal cut-off: This heater includes a thermal cut-off that shuts the heater off if it overheats due to
abnormal conditions. If this occurs, turn the heater off, unplug it, and inspect and remove any objects on
or adjacent to the heater. Allow it to cool for a few minutes, and then plug it back in and resume normal
operation.
Tip-over switch: This heater includes a safety tip-over protection feature that will shut the heater off in
case it is tipped over. If, at any time, the heater tips over, please put the heater back in the upright
position. The heater will resume its normal operation.
CLEANING AND MAINTENANCE INSTRUCTION
1. The electric heater should be cleaned regularly to wipe out the dust on the surface of flanges. As this
may influence the radiating efficiency.
2. Disconnect electricity supply and allow radiator to cool, wipe out dust with a soft damp cloth. Do not
use detergent or abrasives.
3. Do not scrap the surfaces of flanges with sharp hard tools, to avoid surfaces getting rusty, because of
damage of the paint coat.

MAIN TECHNOLOGY SPECIFICATIONS

Power supply: AC220-240V ~ 50Hz
POWER REGULATION RANGE (W)
FAN LO MED
500 1000 1300
GB
HI
2300
WARRANTY: 2 YEARS
GB-06