Enviracaire EFY-041 Serie Manual Del Usuario página 3

ASSEMBLY INSTRUCTIONS (cont'd)
D. Securing the Tower Fan to the Pedestal
• Pull the tower fan power cord through the pedestal and base
assembly (Fig. 7).
• With the base on a flat surface, align the pedestal arrow marked
as with the tower fan arrow marked as
base steady and rotate the fan clockwise to lock the tower fan in
place. You will hear a clicking sound when the pedestal/base is
locked in place.
E. Securing the Cord to the Base
• Carefully turn the fan on its side.
• Locate the cord holding bracket on the bottom of the base.
• Gently pull any slack out of the power cord and place the power
cord securely in the holding bracket (Fig. 8).
• Return the tower fan to its upright position.
Note: Do not operate the tower fan unless it is in its proper,
upright position.
F. Placing the Remote Control in the Storage Area
• Locate the remote control that has been provided with the tower
fan. Make sure that the remote control is not thrown out with
the packing materials.
• Install batteries into the remote control battery compartment
(see Battery Installation/Replacement Instructions).
• Place the remote control in the recessed remote holder located
on the top of the fan.
BATTERY INSTALLATION/REPLACEMENT INSTRUCTIONS
A. Separate the front and rear housing by inserting a small coin into the two recessed
slots located on the bottom of the remote (Fig 9). Twist the coin until the housings
separate. Pull the remote open, separating the halves (Fig. 10). This will
automatically force the lens cover to dislodge.
B. Insert 2 AAA batteries into the remote following the directional guides in the recessed
slots (Fig. 11).
C. Snap the remote together by lining up the front and back and firmly pressing together.
D. Replace the Lens Cover to its original location by snapping back into place (Fig. 12).
Fig. 9
Coin
NOTE: DO NOT MIX OLD AND NEW BATTERIES. DO NOT MIX ALKALINE, STANDARD
(CARBON-ZINC) OR RECHARGEABLE (NICKEL-CADMIUM) BATTERIES.
All manuals and user guides at all-guides.com
Fig. 10
. Firmly hold the
Fig. 11
Fig. 7
Fig. 8
Fig. 12