Technical Specifications - Nice TCB65 Instrucciones Y Advertencias Para El Instalador

5) Disposal
The TCB sensitive edge is made up of different materials, some of
which can be recycled, such as aluminium and electrical wires; oth-
ers must be disposed of as waste, such as the rubber profile.
1. To prevent inadvertent start-up of moving parts, disconnect the
automation from the electrical mains
2. Disassemble the sensitive edge by performing the procedure in
the section "Assembly and installation" in reverse order

6) Technical specifications

With the aim of improving its products, Nice S.p.a reserves the right to apply modifications to technical specifications at any time without
notice, while maintaining the intended functions and use.
All technical specifications given below are referred to an ambient temperature of 20°C (±5°C)
TCB65 sensitive edge technical specifications
Type
Sensitive profile materials
Safety class
Sensitive profile length
Mechanical stability
Switching angle
Switching cycle duration
Operating temperature
Protection rating
Nominal resistance in rest conditions
Nominal resistance on activation
Maximum electrical limits
Resistivity
Maximum cable length
Sensitive edge dimensions and weight
Aluminium profile dimensions and weight
Overall dimensions and weight
Conformity to standards and certification
The TCB sensitive edge, assembled according to the instructions and complete with specific detection unit, has been certified by the man-
ufacturer at TÜV of Hanover D (Notified body 0032) as compliant with the following standards:
• EN 954-1 Machine safety – Safety related parts of control systems – General principles for design
• EN 1760-2 Machine safety – Pressure-sensitive protective devices - General principles for design and testing of pressure-sensitive edges
and pressure-sensitive bars
• EN 12978 – Industrial, commercial and garage doors and gates. Safety devices for power-operated doors and gates- Requirements and
test methods.
All manuals and user guides at all-guides.com
3. As far as possible, separate all parts that can or must be recycled
4. Sort and deliver the materials to authorised disposal firms as
Pressure-sensitive edge used as protective device (PSPE) to limit the force of automations on
auto matic gates or doors.
EPDM with switching chamber in conductive rubber
class 3 according to standard EN 954-1
10m
500N
±20°
100.000
-20 ÷ 55°C
IP 65 (correctly installed)
8200Ω ± 500Ω
<1000Ω
24V; 100mA
600Ω m/m
30m
35x65 / 1200g/m
35x14 / 380g/m
35x79 / 1580g/m
or disposed of according to special procedures.
envisaged by local legislation.
GB
5