FRAM FreshBreeze CF12150 Guia De Inicio Rapido

CF12150
Installation Bulletin:
Bulletin d'installation :
Boletín de Instalación:
Estimated time of installation:
Temps estimé pour l'installation :
Tiempo estimado de instalación:
Application:
Ford F150
Application:
Aplicación:
For more application specifics,
please refer to our catalog.
Pour obtenir plus d'information
sur les applications, veuillez
consulter notre catalogue.
Para obtener información
específica sobre la aplicación,
consulte nuestro catálogo.
FRAM Group Operations LLC
28399 Cedar Park Blvd.
Perrysburg, OH 43551-4864 U.S.A.
©2014 FRAM Group IP LLC
FRAM Group (Canada) Inc.
2430 Meadowpine Blvd.
Unit 107
Mississauga, ON
L5N 6S2 Canada
SOME VEHICLES MAY DIFFER SLIGHTLY. IF YOU HAVE QUESTIONS
REGARDING THIS FILTER, ITS INSTALLATION OR MORE DETAILS
SPECIFIC TO YOUR VEHICLE, PLEASE VISIT
www.framfreshbreeze.com
FOR HOW-TO VIDEOS AND ADDITIONAL INFORMATION.
CERTAINS VÉHICULES PEUVENT PRÉSENTER DES DIFFÉRENCES. SI VOUS
AVEZ DES QUESTIONS CONCERNANT CE FILTRE, SON INSTALLATION OU
DÉSIREZ OBTENIR PLUS DE DÉTAILS CONCERNANT VOTRE VÉHICULE,
VEUILLEZ VISITER LE www.framfreshbreeze.com POUR OBTENIR
DES DÉMONSTRATIONS VIDÉOS ET PLUS D'INFORMATION.
PUEDE VARIAR UN POCO EN ALGUNOS VEHÍCULOS SI TIENE PREGUNTAS
SOBRE EL FILTRO Y LA INSTALACIÓN O DESEA INFORMACIÓN EN DETALLE
PARA SU VEHÍCULO, VISITE www.framfreshbreeze.com, DONDE
ENCONTRARÁ VIDEOS INSTRUCTIVOS E INFORMACIÓN ADICIONAL.
Importado por:
FRAM Group Operations Mexico City S.A. de C.V.
Carretera México-Cuautitlán km 31.5 S/N
Nave 5, Conjunto Industrial Cuautitlán.
Col. Loma Bonita
Cuautitlán, Endo. de México
MEX, C.P. 54800
Tel. 01 800 7154 135
Hecho en China
Tools: Phillips-head screwdriver
Location of cabin filter: Behind glove compartment
02-15
30 minutes or less
30 minutes ou moins
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
30 minutos máx.
1. Lower the glove compartment by disconnecting the dampener arm and pushing in on both sides.
2. Remove plastic trim from the upper portion of the glove compartment.
3. Remove the screws holding in the upper portion of the compartment. Gently unclip and remove this section.
4. Disconnect the electrical connector from the left side of the glove compartment.
5. Locate and remove the cabin filter access door.
6. Remove the old cabin filter from the housing.
7. Install new cabin filter.
8. Replace the cabin filter access door.
9. Replace the upper portion of the glove compartment and plastic trim.
10. Swing the glove compartment back into position.