UNPACKING
•
•
SETTING UP
•
•
•
•
•
•
ADJUSTMENTS
•
To set the roll guides in position, lift them out, move to the desired position and re-insert.
•
WATER LEVEL ADJUSTMENT: The amount of water required for proper moistening of different
grades and types of tape will differ. Heavier glues on reinforced tapes will normally require a
higher
water
The water level is controlled by the position of the front water bottle bracket. To adjust the water
level loosen the two screws on the bottle bracket, move to desired position and tighten both
screws.
INSTRUCTIONS FOR USE
level.
Lighter
tapes
require
less
water
and
a
lower
level.