dirna Bergstrom bycool COMPACT 1.4 Instrucciones De Montaje página 16

COMPACT 1.4
EN
CABIN EXTERIOR:
5
Position the Compact in the hatch gap.
Position foam rubber, ensuring the softest part
6
is placed on the base of the unit.
CABIN INTERIOR:
7
Screw on (4) 8/125x70 studs approximately
10 mm with rubber washer, flat washer and
nut, and tighten.
8/125x70 Stud
M8 Nut
Rubber
Ø8 Flat
washer
wide-rimmed
washer
5
!
6
Rubber
washer
Ø8 Flat
wide-rimmed
7
washer
16
Air conditioning for vehicles
Caution! When positioning the
unit above the hatch gap, check
that the wastewater run-offs are
not blocked by the EPDM seal.
7
M8 Nut
5
Hatch
10 mm