Bellman & Symfon CARQ Manual Del Usuario página 72

Installation – intercom and electronic doorbell
1 Remove the protective film from the external microphone (sold separately)
and attach it to the intercom's speaker. Connect it to the door transmitter.
2 Pull the battery tab to start the transmitter. Clean the wall with the wet
wipe and remove the protective film from the Velcro.
3 Mount the door transmitter to the left of the doorbell's sound source, as
close as possible. Note: The intercom and doorbell must be at least 25 cm,
10" apart to avoid sound interference.
1 2
Ext. mic. Ext. mic.
137 137
Installation – intercom and mechanical doorbell
If you have an intercom and a mechanical doorbell, you may need two door
transmitters, i.e. one for each sound source.
1 Pull the battery tab to start each door transmitter. Clean the wall surfaces
2 Mount one of the door transmitters to the left of the doorbell and the other
3
Max 3 cm, 1.2" Max 3 cm, 1.2"
Electronic
Doorbell
with the wet wipe and remove the protective films from the Velcros.
to the left of the intercom's speaker, as close to the sound sources as possible.
Max 3cm Max 3cm
,1.2"
1 2 2
Max 3cm Max 3cm ,1.2"
138 138