Description Of Front Panel Operation And Lcd Information - Stardom SOHORAID SR4 Serie Manual De Usuario

Step 7 Connect one end of the AC power cord to the SR4-WBS3's power socket and the
English
other end to a wall socket. Then power on the unit.
Deutsch
Step 8 The front HD indicator starts to flash in red after power-on, indicating the system is
initializing; meanwhile, the front monitor will display the following screens:
Français
Powering UP
-Re-init?
Español
The monitor will display the following screens after system initialization is completed;
中文
日本語
한국어
Then, you may complete HD OS formatting according to the instructions of OS.
After power-on, your OS will automatically recognize RAID capacity. After successful
recognition, please complete the system HD formatting according to OS instructions based
on your desired storage format. You may directly run your RAID system following HD
formatting.

5. Description of Front Panel Operation and LCD Information

Press Select key on the front panel; you will see Next and Quit keys after entering the Menu.
You will see Go and Yes keys after pressing the Go key on the front panel to enter the Menu.
Time needed for RAID data reconstruction.
One HD in the RAID fails. Please restart the system to check if the HD is failed. If HD failure
is confirmed, please replace it per the following steps.
8
Detecting disks
Waiting
Active
--Menu
COMREST Success
-Next
FET Success
Go-
Rebuilding
--Menu
Degrade
--Menu
SOHORAID SR4 Series User Manual
--Menu
FET Success
Go- -Quit
xh:xm
xh:xm
Active
Go-