Sanus VLF628 Manual De Instrucciones página 14

STEP 2A
6
DRILL
14
4X
Be sure you drill into the CENTER of the stud.
CAUTION:
Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 ½ in. (8.9 cm).
14
(continued)
3 ½ in. (8.9 cm)
7/32 in.
(5.5 mm)
7
SECURELY TIGHTEN
washers MUST be installed in TOP positions
19
19
15
17
4X
14
CAUTION:
Avoid potential personal injury or property damage!
All four lag bolts MUST BE firmly tightened to prevent
17
unwanted movement of the wall plate
washers must be installed in the TOP hole positions.
19
Install the four lag bolts and two washers
17
they are pulled flush against the wall plate
. The two square
15
and firmly tighten until
19
.
15
Go to STEP 3 on PAGE 18.