Alarm Set - Sytech SY-1032 Manual De Usuario

POWER SOURCE
Plug in the AC line cord into an AC 230V 50Hz power outlet. The unit display will switch on and the
display will show "00:00, 1 1". Refer to "Date Set" to adjust the time, month and year.
OPERATING INSTRUCTIONS
1. DATE SET
Press the SET button for 3 seconds to set the year. Use SCAN+ and SCAN – button to increase
or decrease the years. Press one more time to set the month. Press a third time to set the date,
hour and minutes consecutively.
2. TIME MODE SET
Press the 12/24, HOUR button to select twelve hour clock or twenty four hour clock.

3. ALARM SET

Press the ALARM1 button for 3 seconds to display and activate the Alarm symbol. Adjust the
hours by pressing one more time on the ALARM1 button. Press once more the ALARM1 button
to adjust the minutes. To adjust the hours and minutes, simply press the SCAN+ or SCAN-
button. To deactivate the ALARM1 function, press and hold the ALARM1 until the ALARM
symbol disappears from the display. The operating process forALARM 2 is exactly the same as
the ALARM 1.
4. SNOOZE BUTTON
If you want to prolong the alarm when it has gone off at the time set, simple to simply press the
"snooze" button and the alarm will shut off for approximately 9 minutes before it sounds again.
If you wish to turn off the alarm, simply press the "FUNC" button.
5. SLEEP CONTROL
If you wish to hear the radio for a certain time before going to sleep, press the "FUNC" button to
switch to the radio mode. Search the desired channel by pressing the SCAN+ or SCAN- button.
At this moment, press the SLEEP button and the display will show 90 min. Press the SLEEP
button until you have set the desired time for the unit to off. The options for the SLEEP function
are as follow: 90, 80, 70, 60, 50, 40, 30, 20, 10 Off. Once the selected time has elapsed, the
radio will automatically shut down.
All manuals and user guides at all-guides.com
DISPLAY
E-4