Tabla de contenido
Idiomas disponibles
Idiomas disponibles
HEADPHONE JACK
To use headphones with your Boombox, lower the volume before connecting them to the
3.5mm Headphone jack [17]. Once connected, slowly adjust the volume to a comfortable level.
The speakers will be disabled when headphones are connected.
CAUTION: LISTENING WITH HEADPHONES AT HIGH VOLUME LEVELS MAY
CAUSE PERMANENT HEARING LOSS.
PARTY LIGHT
To change the party light effects, press the LIGHT button [26]. You can choose from five
different preset modes.
To disable the party light, press the LIGHT button [26] until the lights turn off and the display [1]
reads "LIGHT OFF".
FM & AM TUNING MODES (Radio)
Listen to FM or AM radio broadcasts. Press the FUNCTION button [27] until the display [1]
reads FM or AM, respectively.
• To optimize reception when listening to stations on the FM band, extend the
telescopic antenna to its full length. To optimize reception for AM band stations,
gently move the unit around, or position the unit in an open place.
TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
• Tune to a station by turning the TUNING dial [21]. The station frequency is
shown on the display [1].
To tune to a preset station:
• To tune to the next preset station, press the DIR/MEM/10+ button [4].
• To tune to the previous preset, press the DIR/MEM/10– button [5].
AUTO PRESET MEMORY / SCAN
To scan for stations within reception range and save them to preset memory automatically,
press the PLAY/PAUSE/PAIR button [14]. After the unit is finished scanning, the unit will
automatically tune to preset number 1 (P01).
MANUAL PRESET MEMORY
Choose which stations to save in preset memory instead of scanning automatically.
1. Turn the TUNING dial [21] to tune to the station that you want to save as a preset
(e.g., 93.10).
2.
Press the PROG/P-MODE button [6]. "P01" will flash on the display to indicate
that you are saving the station as Preset Memory 01. (To change the preset
memory number, press the DIR/MEM/10+ [4] or DIR/MEM/10– [5] buttons.)
3. Press the PROG/P-MODE button [6] to finish saving the station (e.g., P01 is now
set to 93.10).
4. To save another station, repeat steps 1 to 3. You may save up to 30 FM stations
and 10 AM stations.
All manuals and user guides at all-guides.com
6
Tabla de contenido
