EWT CLIMA 801 LS Manual Del Usuario página 4

Assembly Instructions
Unpack the heater making sure that all the items
are present, that there are no components left in
the box and that the heater head is free from any
packing material. The heater must be handled
with care to avoid any damage.
Do not connect the heater to electrical supply
if any of the components or the power cord is
damaged in any way.
Method
Fix the base to the heater pole using the
3 pcs M8 * 25 mm screws provided. Tighten
srews by hand using the allen key provided,
see Fig 2.
Operation
Connect the power cord to a 13 amp supply
that is located in a safe dry area. The switches
on the heater are used to control the operation
of the heater and of the light on the top of the
heater. The switch marked (L) in Fig 1 controls
the light.The switch marked (E) in Fig 1 controls
the element. The unit must be securely grounded
during operation.
Although the heater is shower proof, do not
use when raining or in wet conditions. Always
disconnect the power cord from the electrical
supply when the patio heater is not in use.
Care and Maintenance
The head of the heater is at a high temperature
during operation. Disconnect the heater from
the electrical supply and wait until it cools before
cleaning.
Clean the outside of the heater with a damp
cloth. Never use corrosive or solvent cleaners
or immerse in water.
Any maintenance or repairs including replacement
of the halogen tube should only be carried out
by a qualified electrician or by a recommended
service centre.
All manuals and user guides at all-guides.com
Recycling
For electrical products sold within
the European Community. At the
end of the electrical products
useful life it should not be disposed
of with household waste. Please
recycle where facilities exist.
Check with your Local Authority
or retailer for recycling advice in
your country.
After Sales Service
Should you require after sales service or should
you need to purchase any spares, please
contact the retailer from whom the appliance
was purchased or contact the service number
relevant to your country on the warranty card.
Please do not return a faulty product to us in the
first instance as this may result in loss or damage
and delay in providing you with a satisfactory
service.
Please retain your receipt as proof of purchase.