L'Oreal Professionnel Rowenta Steampod Manual página 14

When using the straightener, you must be able to see steam coming out and hear the noise of the steam.
If you can't see any steam anymore and you can't hear the noise of the steam any longer either, this means that
the reservoir needs to be filled up.
In this case, once you have filled the reservoir, you will need to wait for about 90 seconds before the steam starts
coming out of the straightener again.
WARNING: Using the reservoir on a flat position. Your tool has feet underneath the reservoir to keep it flat
during use. Place the reservoir on a flat, stable surface. Do not hang your straightener by its steam cord.
4. SWITCHING ON YOUR STRAIGHTENER
st
USING IT FOR THE 1 TIME
1) Plug in the straightener.
To switch your straightener on: press continuously on the on/off button
The LCD screen will then come on automatically.
2) Select the ideal temperature for the type of hair you want to straighten using the + and – buttons:
Press the – button to reduce the temperature or the + button to increase it.
• It takes 90 seconds for the straightener to heat up.
Whilst it is heating up the temperature indicator of the straightener will flash.
• There are 5 temperature settings for you to choose from: 170-180-190-200-210°C (330-350-370-390-410° F).
• We advise you to observe the following recommendations:
Type of hair Normal
Fine hair 200°C – 390°F / 1 to 2 runs
Normal hair 210°C - 410°F / 1 to 2 runs
Thick hair 210°C - 410°F / 1 to 2 runs
• When the temperature shown on the indicator stabilises and remains constant, this means that the temperature that
you have chosen has been reached.
• After 5 seconds, the straightener will go into LOCK AUTO mode (a padlock symbol appears on the dial). This mode stops
any ill effects occurring if you inadvertently press on a button you shouldn't have during use (for example pushing
by mistake on the + /- buttons during use).
• If you wish to change the temperature of your straightener, you will have to unlock it:
To do this, press again for a few seconds on either the + button or the -.button. The control is now unlocked and the
padlock sign will disappear from the screen.
At any time you can exit the control by pressing continuously on the – or + buttons.
When you use your straightener for the very first time, keep the tong closed in your hand until the steam appears
(it will take around 90 seconds for you to obtain steam the first time you use your straightener).
Fragile
190°C – 370°F / 1 to 2 runs
200°C – 390°F / 1 to 2 runs
200°C – 390°F / 2 runs
13
Very fragile
180°C – 350°F / 1 to 2 runs
190°C – 370°F / 1 to 2 runs
200°C – 390°F / 2 runs
EN