Idiomas disponibles
Idiomas disponibles
Soundbar with Wireless Subwoofer
Controls and Connections (Cont.)
Wireless Subwoofer
PAIR Indicator: Lights up solidly when the
pairing is successful.
Pair Button: Connect to the main unit.
Power Socket: Connect to power.
Pairing the Wireless Subwoofer With the Main Unit
Automatic pairing
The subwoofer and soundbar will automatically pair when both units are plugged into
the mains sockets and turned on. No cable is needed for connecting the two units.
• When the subwoofer is paired with the main unit, the Pair Indicator will light up.
NOTE:
- Do not press the Pair button on the rear of the subwoofer, except for manual pairing.
- If the automatic pairing fails, pair the subwoofer with the main unit manually.
Manual Pairing
1. Ensure that all the cables are well connected and the main unit is in Standby mode.
2. Press the (power icon) button on the main unit or on the remote control to switch the
main unit on and go to AUX mode.
3. Press and hold the Pair button on the rear of the subwoofer for a few seconds. The
subwoofer will enter the pairing mode and the Pair Indicator will blink quickly. At the
same time, press and hold the pair button on the remote control.
4. After the wireless connection succeeded, the Pair Indicator will light up.
5. If the Pair indicator blinks, the wireless connection has failed. Unplug the cable of the
subwoofer and then reconnect the main cable after 3 minutes. Repeat step 1 ~ 4.
NOTE:
example,interference from an electronic device) around your location. Remove these
• The subwoofer should be within 6m of the soundbar in an open area.
• If a TV or an external device is connected, the main unit and the subwoofer will switch
on automatically when the TV or the external device is switched on.
• If the main unit is not connected with the subwoofer and it is in On mode, the POWER
12
All manuals and user guides at all-guides.com
Controls and Connections
866-235-5029
Capítulos
