Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Recipes
BlueRhino.com/recipes
Troubleshooting
Problem
Burner will not light using ignitor
Burner will not light with match
Sudden drop in gas flow or reduced flame height
Irregular flame pattern, flame does not run the
full length of burner
Flame is yellow or orange
Flame blow out
Flare-up
Persistent grease fire
Flashback (fire in burner tube(s))
Inside of lid is peeling (like paint peeling)
Need help? 1.800.762.1142
Do not return to place of purchase.
Possible Cause
LP gas tank valve is closed
LP gas leak
Battery needs to be changed
Wire loose or disconnected
Bad ignitor
LP gas leak
Disengagement of burner to valve
Poor alignment of valve to burner venturi
Burner and/or burner tubes are blocked
For more assistance please visit us online at www.BlueRhino.com or call 1.800.762.1142.
Replacement Parts
parts.BlueRhino.com /
1.800.762.1142
Prevention/Cure
Make sure regulator is securely attached to the LP gas tank, turn LP gas tank
Tighten by hand only-do not use tools.
Reengage burner and valve
Clean venturi and burner tube
"
a. Turn control knob(s) "
c. Disconnect regulator
d. Turn control knobs to
f. Turn control knobs to "
g. Reconnect regulator and leak check connections
Clean venturi
Clean burner
Trim fat from meat before grilling
"
Clean burners and/or burner tubes
flaking off
Tabla de contenido
