Technical Data; Maintenance And Care; Environmental Protection - Lasermark Gizmo Lite Serie Manual De Instrucciones

the beam path over a relatively long distance and take the necessary
precautions.
The instrument complies with all applicable portions of title 21 of the
Code of Federal Regulations set by the Dept. of Health, Education
and Welfare, the Food and Drug Administration, the Center for
Devices, and the Bureau of Radiological Health.
The instrument has also been tested and complies with the CE
certification requirements set forth in the EC regulations 89/336/EEC
and EN 61000-6-1 (EN50082-1), EN 61000-6-3 (EN50081-1) and IEC
60-825-1.

TECHNICAL DATA

LASER TYPE: 635 nm, < 1 mW
LASER CLASS: 2
VISIBILITY RANGE: 10 m according to
the light conditions
LEVELLING ACCURACY: 4 mm at 9 m
PARALLELISM: +/- 1,5 mm at 3 m
LINE LENGTH: approx. 20 m at 10 m
distance
FAN ANGLE: approx. 90°
POWER: 3 "AA" cell batteries
BATTERY LIFE: approx.25 hours with 1 diode, 20
hours with 2
diodes and 15 hours with 3
diodes
WEIGHT: 900 g with bracket

MAINTENANCE AND CARE

Always clean the Gizmo Lite after use. Remove any moisture with a
soft, dry cloth.
Do not use aggressive cleaning agents or solvents.
Remove batteries before storage of the instrument.
All manuals and user guides at all-guides.com

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing as waste.
The machine, accessories and packaging should be sorted for
environmental-friendly recycling. Do not throw used batteries into
house waste, fire or water but dispose of in an environmentally
friendly manner according to the applicable legal regulations.
WARRANTY
The warranty time is 12 months starting from the date of purchase,
to be demonstrated through invoice or fiscal receipt, and covers
defects in workmanship and material which may occur under normal
and proper use. Batteries and battery compartment are never
covered by warranty.
In case of repair call Your dealer or our Service Centre in Italy. In both
cases if You send the instrument, the freight costs are on Your
charge. Any attempt to repair the instrument in a non-authorized
centre will invalidate the warranty.
Always deliver the instrument for repair together with the Warranty
Registration Card filled out, the invoice, and indications of the
defect. In case of warranty repair, the warranty itself will not be
prolonged either on the instrument or on the new spare parts.
Replaced parts will be our property.
IMPORTANT NOTE: The customer is responsible for the correct
use and care of the instrument. Moreover he is completely
responsible for checking the job along its prosecution, and
therefore for the calibration of the instrument. Calibration
and care are not covered by warranty.
Subject to change without notice