Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
•
Air Supply and Connection Hazards
•
•
•
•
Torque adjustment:
1.
2.
3.
4.
Supply tool with 90 PSI of clean, dry air. Higher pressure drastically
reduces tool life. Connect tool to air line using pipe, hose, and fitting
sizes shown in Figure 1.
Air under pressure can cause severe injury.
Always shut off air supply, drain hose of air pressure and disconnect
tool from air supply when not in use, before changing accessories or
when making repairs. Never direct air at yourself or anyone else.
Whipping hoses can cause serious injury. Always check for damaged
or loose hoses and fittings.
Whenever universal twist couplings are used, lock pins must be
installed. Do not exceed maximum air pressure of 90 PSI or as stated
on tool nameplate.
Unscrew Torque Cover.
Drop Torque cover out increase torque.
Remove torque cover to adjust torque.
Tighten to the right: increases torque.
Loosen to the left: decreases torque.
5
Tabla de contenido
