Idiomas disponibles
Idiomas disponibles
MANUFACTURED BY:
1.Before mounting the variator your must remove
the cover.
4.
Fix the correct par pulley.
J.CO STA VARIATOR ASSEMBLY INSTRUCTIONS
2.Remove the installed variator and clean all
grease or oil. Install any washers to the original
location. Always in the same position as it were.
5.
Fix the J.Costa variator, it must be repect the
washers position as original variator.
IT620XRP/PRO
VARIATOR CUTTING
3.
Introducir arandela J.Costa.
6.
Fix the tool for bloquing the variator and tighten
with the dynamometric tool to 16kg/160Nm.
ONLY FOR XRP
SPECIAL WASHER
