Weather Icons; Alarm Function - Techno Line WS9135 Manual De Instrucciones

 Press " " once to switch to alarm time display, it will back to normal when there is no key operation within 10 seconds.
 Hold " " more than 2 seconds to enter the alarm setting mode.
 While the alarm sounds, press "SNOOZE" and the alarm will ring again in 5 minutes.
4.2. Manual Setting mode
 In normal display, hold the "SET" button for more than 2 seconds to enter manual setting mode.

The year digits flash on the LCD, press "+/C/F" or "-/wave" to adjust the year. Hold a button for more than 2 seconds to accelerate
this operation.
 Press "SET" once and the month digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the month.
 Press "SET" once and the date digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the date.
 Press "SET" once and "00" is flashing on the LCD. Press "+/C/F" or "-/wave" to adjust the time zone.
 Press "SET" once and "24 Hr" is flashing on the LCD. Press "+/C/F" or "-/wave" to choose between 12 Hr or 24 Hr time display.
 Press "SET" once and the hour digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the hour.
 Press "SET" once and the minute digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the minutes.
 Press "SET" again or press no key pressed for approx. 20 seconds to exit the setting mode.
4.3. Alarm Setting mode
 In normal mode, press the "
 In normal mode or alarm time display mode, hold the "
 Press " " once and the hour digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the alarm hour. Hold a button for more than
2 seconds to accelerate this operation.
Press " " once and the minute digits flash on the LCD. Press "+/C/F" or "-/wave" to adjust the alarm minutes.

 Press " " again or press no key pressed for approx. 20 seconds to exit the setting mode.

5. WEATHER ICONS


The 7 weather forecast symbols: sunny, semi-sunny, cloudy, rainy, rainstorm, snow, heavy snow

6. ALARM FUNCTION


While alarm, the

While alarm, press 'SNOOZE' to start 5 minutes snooze time, icons

Press other keys to stop the alarm
7. RF TEMPERATURE

The station will automatically receive start the outdoor sensor reception for 3 minutes.

Icon will be displayed.
 In normal mode, hold "+/C/F" more than 2 seconds to start the outdoor sensor reception, previous received data will be cleared.
 When in RF receiving mode, other keys are no function except "+/C/F" to exit.

When the outdoor sensor was not received, it will be displayed again when a new signal is received.
8. DCF-77 Reception
1. DCF-77 will be automatically received after start or reset.
Press"-/WAVE" for 2 seconds to start the reception.
2.
3. Automatic reception：On 1:00, 2:00 and 3:00. If the reception fails, it will continue at 4:00 and 5:00.
" button once to display the alarm time, press "+/C/F" or "-/wave" to activate or deactivate the alarm.
icon flashes,
" button for more than 2 seconds to enter the alarm time setting mode.
& icons are flashing.