The Skin Contact Sensor; The Precision Head - CyDen SMOOTHSKIN Bare Fit Manual Del Usuario

9. THE SKIN CONTACT SENSOR

SmoothSkin Bare Fit is fitted with a skin contact sensor that checks your skin contact before each flash, making sure the device
is safe to operate! This makes the device compliant with the most stringent safety regulations.
The skin contact sensor also ensures you get the best results from your device. The sensor must be in full contact with the
treatment area in order for the device to flash.
This full contact with your skin means that all the light energy emitted from the device reaches the treatment area to deliver the
best results. If the device is not in full contact with the treatment area, the device will not fire. Try adjusting the positioning of the
device to ensure full contact is achieved, particularly on more awkward areas like arms and shins.
GAP
ARM
ARM
GAP
ARM
ARM
24
ARM
ARM
ARM
ARM
ARM

10. THE PRECISION HEAD

SmoothSkin Bare Fit comes with a detachable precision head that is perfect for smaller, tricky areas (like upper lip,
fingers, and toes). This has the benefit of giving you even more flexibility during each treatment.
Using the precision head will slow your device down a little, so we only recommend using when needed, to ensure
you get the fastest treatment possible.
The precision head simply attaches on to the front of your device via an internal magnet inside the front of the main
device. This magnet holds the head in place whilst you treat the area. Simply unclip or re-attach depending on what
area you're treating.
25