Tabla de contenido
STEP 2B Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
• Mount wall plate
directly onto concrete surface (no wall covering)
08
• Minimum solid concrete thickness: 8 in. (203 mm)
• Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
1
3
CAUTION:
Be sure the anchors C1 are seated flush with the concrete surface.
Fischer UX10 x 60R C1 - included in the Concrete Installation Kit CMK1.
07
Min.
16 in.
(406 mm)
C1
Solid Concrete or Concrete Block Installation
Concrete Installation Kit CMK1 is not included
Contact Customer Service at 800-359-5520
to inquire about the additional hardware.
2
3 in. (7.6 cm)
3/8 in.
(10 mm)
CAUTION:
Never drill into the mortar between blocks.
4
08
09
002862.eps
CAUTION:
Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt
Tighten the lag bolts
against the wall plate
10
4X
10
only until the washers
are pulled FIRMLY
09
08
. DO NOT over-tighten the lag bolts
07
09
.
09
.
7
Tabla de contenido
