Power Probe IRGUN500 Manual Del Usuario página 4

IRGUN500
Operating Thermometer
• To measure temperature, pull and hold trigger.
Release the trigger to hold a temperature reading.
The meter turns off when no activity is detected for ten seconds.
• Press key to toggle between the MAX ,MIN,AVG value.
• Press key to Active the laser.
• Press key to light on or off the backlight.
• Press key to switch between °C or °F.
Note1
Make sure that the target is larger than the meter's visual spot size.
Note2
When ambient temperature
changes quickly, must wait 30
minutes to balance the
temperature of the instrument
before use.
55
OK
22 ºC
72 ºF
03
12
30Min
9 3
6
EN
0 ºC
32 ºF