Vonyx VMM-F Serie Manual De Instrucciones página 5

1. Microphone Input
Balanced XLR input jacks.
2. Line Input
Balanced 6.3mm (¼") jack line inputs. You can connect either balanced or unbalanced phone plugs to these jacks.
3. Insert
6.3mm (¼") jacks can be used to process channel signal with dynamic processors or equalizers.
4. Gain Control
Adjusts the input signal level. To get the best balance between the S/N ratio and the dynamic range, adjust the gain so
that the peak indicator lights only occasionally and briefly on the highest input transients. The -16 to +30dB scale is the
adjustment range.
5. PAN Control
The PAN control determines the stereo position of the channel.
6. Equalizer
Three-band equalizer adjusts the channel's high, mid and low frequency bands. Setting the knob to the "O" position
produces a fiat response in the corresponding band. Turning the knob to the right boosts the corresponding frequency
band, while turning to the left attenuates the band.
7. Channel Fader
Adjusts the volume for corresponding channel. Use these faders to adjust the balance between the various channels.
8. Effect Control
Adjust the effects volume for corresponding channel.
9. Channel Fader
Adjusts the volume for corresponding channel. Use these faders to adjust the balance between the various channels.
10. Effect Control
Adjust the effects volume for corresponding channel.
11. Aux Send
The Aux send jack carries the master aux mix (from the channel's Aux controls).
12. Phone level
Adjust the volume of headphone.
13. Delay control
Adjust the time interval of echo repeat.
14. Delay Repeat control
Adjust the frequency of delay repeat.
15. VU-Meter Level indicators can show the signal level from output. Adjust the level controller to lower the level if peak
indicator light up in red.
16. Phantom +48V
This switch toggles phantom power on and off. When the switch is on the mixer supplies +48V phantom power to all
channels that have XLR input jacks. Turn this switch on when using one or more phantom-powered condenser
microphones.
17. Line Input CH6/7
6.3mm (¼") jacks for the left and rights sides of the stereo channels, which can be used in parallel.
18. Aux Send
The Aux send jack carries the master aux mix (from the channel's Aux controls).
19. Main Output
6.3mm (¼") deliver the mixer's stereo output. You use these jacks, for example, to connect to the power amplifier
driving your main speakers.
20. Tape Input
These RCA jacks input for stereo sound source. Use this jacks when you want to connect a CD player directly to the
mixer.
21. REC Output
These RCA jacks can be connected to an external recorder.
22. Headphone
6.3mm (¼") jack for connecting a headphone.
23. Mainswitch
24. USB Port
Put the USB-disk into this port.
25. Display
26. Play button
Press the play button to select playing or paused.
27. Previous button
Press the button shortly you can select the previous song, press long for decrease the volume
28. Forward button
Press the button shortly you can select the next song, press long for increase the volume.
29. Mode
switch between different modes
5