Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4. Set the appropriate pressure according to
the bicycle's tire wall. Then flip the high
volume/high pressure switch to the high
pressure setting (right) to initiate inflation
(Fig. 10). The indicator LEDs will cycle
on from left to right to indicate inflation
progress.
NOTE: Once the specified pressure setting
has been reached, the indicator LEDs will
light up solid and the motor will shut off
automatically.
5. After inflation, return the high volume/high
pressure switch back to the off (middle)
position. Then remove the air chuck and
retighten the locking nut (Fig. 12).
Sports Ball Needle
Inflate all kinds of sports balls with the Sports
ball needle (Fig. 14).
Fig. 14
Air Chuck
Tapered Adapter
Inflate all kinds of small plastic or rubber
inflatables such as pool rings, floats, air pillows
and more with the tapered adapter (Fig. 15).
Fig. 15
Air chuck
Tapered
adapter
Inflating with the High Volume
Air Hose
The high volume air hose can be used to inflate a
variety of large inflatables such as rafts, bouncy
castles, air beds, inflatable pools and more.
Sports ball
needle
8
1. Pull out the high volume air hose from the
back of the unit. Insert the slotted end of the
hose into the high volume inflator and twist
counter-clockwise until it locks into place
(Fig. 16).
Fig. 16
High volume
inflator
2. Choose between the two high volume
adapters based on the size of the air valve
on the item. Insert the adapter into the air
valve (Fig. 17).
Fig. 17
High volume
hose nozzles
3. Flip the high volume/high pressure switch
to the high volume setting (left) to initiate
inflation (Fig. 18).
High volume/high pressure switch
High volume
4. Flip the high volume/high pressure switch
back to the off (middle) position once the
item has been sufficiently inflated.
High volume hose
Air
valve
Fig. 18
Tabla de contenido
