Rx Par; Manual Freq Mode; Noise Gate; Rx Info - dBTechnologies RS16000TR Manual Del Usuario

RX PAR

It allows:
• setting the attenuation level in dB "Out Att" in audio
output, with range [0 ÷ -99] dB (end: MUTE)
• signalling the type of microphone/line, output audio
level "Out Level"
• seeing the ID "Rx Hub" associated for the network
connection of that specific receiver (the IDs are
automatically associated between the values [1-255])

MANUAL FREQ MODE

It allows:
• enabling/disabling the frequency manual selection
mode
• setting the frequency manually, with 25 kHz steps

NOISE GATE

It allows acting on the NOISE GATE activation (useful for
example when using an electric guitar with overdrive):
• by defining the attack in ms (range: [0 ÷ 26 ms ])
• by defining the release in ms (range: [0 ÷ 51ms ])
• by setting the activation threshold in dB
(range [-49 ÷ 1.8] dB)

RX INFO

It allows displaying useful information about:
• firmware version of receiver "FW ver RX"
• firmware version of DSP "FW ver DSP"
• resetting the factory settings "Factory Reset"
RS16000TR
36
RX PAR
Out Att
Out Level
Rx - HUB
MANUAL FREQ MODE
Manual Mode
Frequency
NOISE GATE
Attack
Release
Threshold
RX INFO
FW ver Rx
FW ver DSP
eu Factory Reset
English
English
0 dB
Mic
ID 3
OFF
621,100
0 ms
0 ms
OFF dB
Cod. 420120285 REV. 1.0