Roborock H7M1A Manual página 24

Maintenance
Cleaning Rear Filter
* Washing the Rear Filter every two months is recommended
5. When dry, reinstall the filter by aligning it with the unlock mark,
slotting it into the vacuum, then turning clockwise to lock it in
place.
Cleaning the Multi-Surface Brush
* Follow these instructions when inspecting and cleaning the accessory to ensure
optimum performance. Inspection and cleaning should be performed regularly.
1. Turn the brush head over with the bottom facing you. Look for
debris, including hair and fibers on the head or in the bearings.
2. Remove all debris. Use scissors if necessary.
Note: Before cleaning, detach the accessory from the vacuum to avoid accidental injury. The
multi-surface brush contains electrical components and bearings. Do not wash it with water.
24