FCC warning
The device meets provisions of part 15 of FCC rule. Operation meets the following 2
conditions: (1) the device will not cause harmful interference, and (2) the device
must accept any interference received, including interference that may result in
accidental operations. User manual or operating instructions shall remind users
that intentional or unintentional modification and replacement of radiators without
explicit approval from the responsible compliance party may prevent the user from
operating the device. If the manual is provided in a form other than paper, such as,
provided in computer disk through the Internet, then the information required in
the section can be included in the manual in the alternative form under the premise
that users can have access to the form information.
For B-class digital or peripheral device, instructions provided by users shall include
the following or similar statements and put them in a prominent place of manual
text:
Notes: the device has been tested to meet restrictions of part 15 of FCC rule on B-class
digital device. These restrictions are aimed at providing the effective prevention of
harmful interference in a residential installation. If installation and use are not made
according to the instructions, the device will generate and radiate radio frequency
energy, and may cause harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a particular installation. If the
device does cause harmful interference to radio or television reception (determined
by stopping and starting the device), it is suggested that users should attempt to
correct the interference by one or more of the following measures:
- Reposition direction of receiving antenna.
- Increase the distance between the device and the receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver
is connected..
- Consult distributors or experienced radio/television technicians to seek help
- This device is acting as a slave and operating in the 2.4 GHz (2402-2480 MHz,
2412-2462 MHz) band or 5 GHz (5.180 GHz-5.240 GHz, 5.260 GHz-5.320 GHz,
5.500 GHz-5.700 GHz, 5.745 GHz-5.825 GHz) band.
FCC ID: 2AFENWM03A
13