Before You Begin - Kohler Reve K-892-0 Instrucciones De Instalación

Tools

Before You Begin

WARNING: Risk of personal injury. Wear personal protective equipment and obtain
sufficient help to carefully lift or move the bath. Cast iron baths are extremely heavy. If the cast
iron bath is not lifted properly, personal injury may occur.
CAUTION: Risk of property damage. When planning the framing, take into consideration the
height of the bath with the feet. The bath must be supported by the feet only to avoid property
damage. Do not support the bath by the framing or bath rim.
CAUTION: Risk of product damage. Not recommended for installation in a continuously wet
environment.
CAUTION: Risk of product damage. If welding is required, cover the bath's surface to prevent
welding deposits from damaging the enamel surface.
IMPORTANT: Prior to installation, carefully inspect all surfaces of the bath. If there are any areas of
concern, DO NOT INSTALL. Call 1-800-4KOHLER (1-800-456-4537) for further assistance.
IMPORTANT: The bath must be installed indoors. Outdoor installation will void the warranty.
NOTICE: This product requires a K-7271 drain (brass pipe) or a K-7272 drain (PVC pipe) for proper
installation.
Follow all local plumbing and building codes.
Before moving the bath, carefully plan the installation area. This bath is heavy and will not easily fit
through doorways.
Unpack and inspect the bath for damage. Return the bath to the carton until installation.
Ensure proper access to final plumbing connections.
These instructions are for both freestanding and drop-in installations. Follow the instructions that
apply to your particular installation.
This bath conforms to ASME Standard A112.19.1/CSA B45.2. All dimensions are nominal.
1432009-2-A
Plus:
All Installations
• Conventional woodworking tools and materials
• Drop cloth
• 2x4s or 2x6s
• Water-Resistant Deck Material
• Rags
• Metal Shims
• Finished Material
Undermount Installations
• Template
• Masking tape
• File
• Jigsaw
• Router
• Weights
2 Kohler Co.