Shutting Down The Unit; Warranty; Information On The Engine - Cub Cadet 13B726HD603 Instrucciones De Funcionamiento Originales

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65

Shutting down the unit

Replace fuses
Replace defective fuses only with ones of an
equal rating.
Once a season
Apply multipurpose grease to the teeth on the
steering gear.
Lubricate the steering linkage with a few drops of
light oil.
Lubricate all rotating and bearing points (operating
lever, height adjustment of the cutter deck ...) with
several drops of light oil.
Clean the spark plug and check the gap between
the electrodes or replace the plug. See engine
handbook.
The rear axles must be lubricated with a spe-
cial-purpose (water-repellent) grease in a spe-
cialist workshop.
The cutting blade must be sharpened or replaced
by a specialist workshop.
Shutting down the unit
Attention
Material damage to the device
Only store the mower once the engine has cooled in
a clean and dry room or area.
During prolonged storage, e.g. in winter, ensure that
the device is protected against rust.
At the end of the season or if the unit will not be
used for longer than a month:
Clean the mower and grass catcher attachment.
Wipe all metal parts with an oily rag or spray them
with oil to protect them from rust.
Charge battery with a battery charger.
When shutting down the appliance for the winter,
remove the battery, charge it and store in a dry/
cool location (protected from frost). Charge the
battery every 4–6 weeks as well as before re-in-
stalling it.
Drain the fuel (outdoors only) and shut down the
engine as described in the engine manual.
Inflate tyres according to the specifications on the
tyre walls. If tyres have no specifications on the
tyre walls, inflate to a pressure of 0.9 bar.
Store the mower in a clean, dry room.

Warranty

The warranty rules issued by our company or the
importer apply to every country.
Under the terms of the warranty we will repair faults
on your device free of charge, insofar as material or
manufacturing defects are the cause.
To make a claim under warranty please contact your
seller or your nearest branch.

Information on the engine

The engine manufacturer is liable for all engine-re-
lated problems with respect to power, power mea-
surement, technical specifications, warranty and
service. Information can be found in the owner's/
user handbook supplied separately by the engine
manufacturer.
EN
17
Tabla de contenido
loading

Tabla de contenido