Unit Assembly - Uline H-2452 Manual Del Usuario

Figure 4
Figure 5
Figure 6
Figure 7
PAGE 2 OF 6
ASSEMBLY CONTINUED

UNIT ASSEMBLY

1. Start with the lowest shelf. Snap the interlocking pieces
of a shelf support (wide end down) around the post
at the lowest groove where shelf is to be located.
Slide the support up or down until it snaps into the
groove. Add a shelf support to the same place on the
remaining posts. (See Figure 4)
2. Slide posts through underside of shelf until shelf slides
firmly over supports. (See Figure 5)
3. Stand unit upright. Gently tap shelf down to secure it.
(See Figure 6)
4. Determine the height of the next shelf, snap on
supports then add and secure shelf. Repeat Step 4 to
add the remaining shelves. (See Figure 7)
1-800-295-5510
uline.com
NOTE: NSF requires food service applications to
keep the lowest shelf at least 6" above the floor.
0221 IH-2452