Zipro Dash Manual De Uso página 26

COMPUTER MANUAL
Remove the safety film from the display before use.
COMPUTER (MODEL)
RMIC01PRO
AUTO ON/OFF
The computer is switched on when the flywheel
moves or any button is pressed.
The computer is switched off after four minutes
of inactivity.
BUTTONS
•
RECOVERY – it is used to check your fitness and physical condition based on the heart rate drop
after you stop exercising.
• RESET – returns to the home menu of the computer.
• START/STOP – starts and stops the selected training programme.
• ENTER – selects a programme.
With ENTER, you can check the value of each displayed function during training.
• DOWN / UP – browse through available programmes.
When a function is selected, these buttons set parameter values DOWN or UP.
FUNCTIONS (SPECIFICATION)
TIME Set target time.
TIME/500M The average time per 500 metres.
The value is calculated automatically and constantly updated.
SPM The number of strokes per minute.
DISTANCE The travelled distance.
STROKES The number of strokes done.
TOTAL The total number of strokes.
STROKES
CALORIES The number of calories burnt.
(The measurement is an approximation for comparing training
sessions. Do not use for medical purposes).
PULSE The current training heart rate.
The heart rate can be measured only using a chest strap.
CALENDAR Shows the date in the sleep mode.
TEMPERATURE Shows ambient temperature in the sleep mode.
CLOCK Shows the time in the sleep mode.
CONNECTION WITH THE HRC CHEST BELT
The pulse measurement function is only available through the chest belt system (supplied with the device).
The computer connects to the belt automatically via Bluetooth.
EN
00:00-99:59 min
0-99900 m
0-9990
0-9999
5-990 Cal
30-240 BMP
26