Select One Radio Band; Manual Tuning; Auto Tuning; Auto Store - Speed Sound HQDD800 Manual De Operaciones

Radio Operations

Select one radio band

Touch the button to select one radio
band among FM1, FM2, FM3, AM1 and AM2.

Manual tuning

During manual tuning, the frequency will be
changed in steps.
Touch the or
operation bar to tune in a lower/higher station.

Auto tuning

Hold the or
operation bar for more than 2 seconds to seek
a lower/higher station.
To stop searching, repeat the operation above
or press other buttons having radio functions.
Note:
When a station is received, searching stops
and the station is played.

Auto store

Only stations with sufficient signal strength will
be detected and stored in the memory.
To start automatic station search, touch the
button on the operation bar.
To stop auto store, press other buttons having
radio functions.
Note:
After auto store, the previous stored stations
will be overwritten.

Manual store

1. When one expected radio station has
been detected, touch
operation bar to show the preset station
store list.
Touch [Favorite List] to show favourite
station store list.
2. Touch to select a item on the list and touch
[Confirm] to store the current station in the
memory.
3. Touch to exit.
button on the
button on the
button on the

Recall the stored stations

Method 1:
Touch the P1~P6 on the screen to listen the
preset station.
Touch the frequency on the middle of the
screen to listen the favourite station.
Method 2:
1. Touch
show the preset station list.
Touch [Favorite List] to show favourite
station list.
2. Touch a station on the list to listen.
3. Touch

Local seeking

When LOCAL seeking is on, only radio
stations with strong radio signal will be be
received.
To open LOCAL function, touch
button on the operation bar, then touch the
[Sensitivity] button to select "Local" or "DX".
Note
The number of radio stations that can be
received will decrease after the local seeking
mode is on.

Key Search

Touch
show key search menu.
Touch the keypad to input the frequency,
touch
Touch
Touch
EN-12
button on the operation bar to
to exit.
button on the operation bar to
to goto the station directly.
to delete a digit inputted.
to clear all the digits.