Kenmore 10478 Manual De Uso Y Cuidado página 22

CONVERSION INSTRUCTIONS
Adjust valve control screw
1. Pull all the knobs off of valve stems. Adjust
the screw in the valve hole using the
flathead screwdriver (C). Turn screws 6
complete turns counterclockwise.
(Fig. 47)
2. Press all the knobs back onto valve stems.
3. After all the conversions are complete, return heat diffusers to firebox, followed by the
grates and warming rack.
All manuals and user guides at all-guides.com
22
Valve hole
Fig. 47