Installing The Pump; Maintenance And Cleaning; Storage/Winter Protection - Pontec PondoDrain Mud 8000 Instrucciones De Uso

- EN -

Installing the pump

 E
• Install the pump in a horizontal and stable position in the water.
• If it needs to be lowered into a well or a shaft, fasten a rope to the handle. Do not carry it by the power connection
cable.
• Install the pump such that it does not take in dirt particles with a size >25 mm, which would block the intake. Install
the pump in a raised position if necessary.
• Ensure that the float switch can always move freely.
Operation
WARNING
Risk of severe injuries or death by electric shock.

Only operate the pump if no persons are in the water.

Disconnect all electrical devices in the water from the power supply before reaching into the water.
Switching on the unit
NOTE
The pump is not suitable for continuous operation. Continuous operation will reduce the pump service life accordingly.
• Insert the power plug into the socket.
– The pump is ready for operation.
– The pump will start up as soon as the level of the water reaches the switch-on height.
Switching off the unit
• Disconnect the power plug.
– When the pump is switched off, residual water in the hose may flow back and out of the pump intake.

After using the pump, rinse it with clear water.

Maintenance and cleaning

NOTE
Do not use aggressive cleaning agents or chemical solutions. These agents can damage the housing, impair the func-
tion of the device and harm animals, plants and the environment.
 If possible, clean the unit with clear water and a soft brush or a sponge; remove stubborn dirt with the aid of the rec-
ommended cleaning agents.

Clean the unit as required but at least twiceper year.
• Recommended cleaning agent for removing stubborn limescale deposits:
– Vinegar- and chlorine-free household cleaning agent.
• After cleaning, thoroughly rinse all parts in clean water.

Storage/winter protection

The unit is not frost-proof and has to be removed and put into storage if minus temperatures are expected.
How to correctly store the unit:
• Thoroughly clean the unit and renew any damaged parts.
• Store the unit in a dry and frost-free place.
• Protect open plug connections from moisture and dirt.
• Drain/empty hoses and connections as much as possible.
10