Uline H-7551 Instrucciones De Montaje página 2

1. Place middle shelf upside down on flat surface. Attach
bottom posts to middle shelf using short hex bolts,
nuts and washers. Secure with 5/32" allen wrench and
10 mm wrench. The end of the post with more holes
should be attached to middle shelf. (See Figure 1)
Figure 1
Washer
Middle
Shelf
NOTE: Bottom left front post should be
diagonally across from circular hole opening
in middle shelf. Bottom right front post should be
on same length side as bottom left front post.
2. Secure back panel to middle shelf by inserting self-
tapping screws into holes in middle shelf and into
holes in middle of posts. Make sure back panel is on
side closest to hole in corner. (See Figure 2)
Figure 2
Middle
Shelf
PAGE 2 OF 12
Nut
Short
Middle
Bolt
Shelf
Bottom
Post
Back
Panel
ASSEMBLY
3. Secure side panels to middle shelf by inserting self-
tapping screws into holes in middle shelf and into
holes in middle of posts. (See Figure 3)
Figure 3
4. Place bottom shelf upside down and attach to
bottom posts using short hex bolts, nuts and washers.
Secure side and back panels to bottom shelf with
self-tapping screws. (See Figure 4)
Figure 4
Middle
Back
Side
Panel Panel
Side
Middle
Panel
Shelf
Washer
Nut
Bottom
Shelf
Bottom
Bottom
Shelf
Shelf
Short
Bolt
Post
0721 IH-7551