Tabla de contenido
1
(1)
(1
Installation and setting
Revolution pre-selection function
The machine has an electronic function for controlling the revolutions. Activating the switch (2) enables
continuous modification of the revolutions within the specified values, for example, to enable a gentle
start.
The adjustment wheel (3) for pre-selecting the revolutions allow you to select the revolutions suitable for
the material in question, (+ increases the revolutions, (- decreases the revolutions.
Additional handle
The additional handle serves to ensure safe handling and guidance of the machine during sanding. The
handle can be smoothly adjusted to the most practical position for working. Turn the wing screw on the
additional handle to the left to loosen, move the handle to the required position, then tighten the screw by
turning to the right.
2
Inserting sand paper
Switch off the machine, disconnect the power.
The sanding plate is fitted with a hook and eye system for sanding sheets. This enables rapid application of
All manuals and user guides at all-guides.com
R R andom Orbit Sander MPRS480V User Manual
OPERATING INSTRUCTION
(3)
(5)
(4)
GB
(1)
(7)
(6)
(2)
6
Tabla de contenido
