Zoom Function - National Geographic EXPLORER 6 Instrucciones De Uso

EN

Zoom function

The zoom function allows you to adjust how close or far away the subject appears in your photo. No zoom is set by default. The zoom
function is only available in photo mode.
1. Turn on your camera.
2. Activate the photo mode.
3. Press and hold the  or  button to adjust the zoom level.
Save & Playback
When you are finished recording, you can transfer videos to your computer via USB cable. Connect the USB cable to the PC and camera
and select "Transfer files". Access to the SD card memory is now possible from the PC. You can also remove the Micro SD memory card
and access the data through a card reader.
Playback on the camera:
1. Enter the video or photo playback mode. If the SD card contains a lot of contents, it may take a minute to load.
2. Press the  or  button to scroll through the video or photo files.
3. Press the "OK" [ ] button to open the video or photo in full screen mode.
4. Press the [ON/OFF] / Mode [ ] key to return to the file list.
5. To cancel the playback mode, press the [ON/OFF] / Mode [ ] button again.
Playback on the television set:
1. Switch on the television set.
EXPLORER 6
2. Connect the micro HDMI end to the camera and the HDMI end to the HDMI on the television.
3. Wählen Sie die richtige Eingangsquelle am Fernseher.
4. Turn the camera on after a while. You can preview the camera from the TV.
5. Set the camera to the video/photo playback mode.
6. Select the desired content for playback.
41