Network Connection - Aimetis E3200 Serie Guía De Instalación Y Usuario

Network Connection

By default the
E3200 PSA
unavailable, it will automatically select an
255.255.0.0.
• If the network does not have a DHCP server, or you want precise control over the IP address
used, you may assign a specific IP address. Go to
• If the network does not have a DHCP server, or you want precise control over the DNS servers
used, you may assign specific DNS servers. Go to
IP Address
To assign a specific IP address:
1. Clear the
Obtain an IP address automatically using DHCP
2. Enter the address in the
3. Enter a value in the
: If the IP address you select is in a different subnet from the computer you are using, you will
Warning
lose access to the
E3200 PSA
Connect to Your E3200 PSA
All manuals and user guides at all-guides.com
is configured to use DHCP to obtain an IP address. When a DHCP server is
IP Address
Figure 15: Network Connection page
field.
IP Address
field.
Subnet Mask
after saving your changes.
14
in the range
169.254.X.X
"IP Address" on page 14
"DNS Servers" on page 15
check box.
and a of
Subnet Mask