DT NO.I DT70 Manual Del Usuario página 58

reminder and save it. When the reminder time for drinking water arrives, the watch
will vibrate and there will be a drinking water icon.
11. Dial push
11.1 Push an existing watch face
Connect to the app, go to Device>Dial Push>Select Dial>, and make sure to replace
it with this dial. After the dial is synchronized, the watch will automatically
restart and then automatically connect to the app.
11.2.Customize the watch face
Connect to the APP, select Device>Dial Push>(Dials with pen icons belong to custom
dials) Custom Dial Settings>You can choose a custom background. After the dial is
synchronized, the watch will automatically restart and then automatically connect
to the app.
12. Firmware version
The version of the watch is displayed, and the user can choose to upgrade the firmware
version.
13. Unbind
Bind the watch to the app, unbind in the device, click OK and unbind, the IOS system
needs to go to the settings of the phone to ignore the Bluetooth device.
●Frequently asked questions and answers
*Please avoid exposing the device to extreme temperatures that are too
cold or too hot for a long time, which may cause permanent damage.
*Why can't I take a hot bath with my watch?
The temperature of the bath water is relatively changed, it will produce
a lot of water vapor, and the water vapor is in the gas phase, and its
molecular radius is small, and it is easy to seep into the gap of the
watch case. The internal circuit of the watch is short-circuited, which
damages the circuit board of the watch and damages the watch.
*No power on, no charging
If you receive the goods and the watch does not turn on, it may be caused
by a collision during the transportation of the watch and the battery
Seiko board has been protected, so plug in the charging cable to activate
it.
If the battery is too low or the watch does not turn on after a long period
of time, please plug in the data cable and charge it for more than half
an hour to activate.
Warranty description:
1. When this product is in normal use, if there are product quality
problems caused by manufacturing, materials, design, etc.,