Tabla de contenido
1. You can connect to the APP. In the device of the APP" select frequently used contacts" add
contacts (up to 20 contacts can be added), which can be synchronized to the watch, and the
watch can display up to 20 contacts.
1.7 Fitness data
The fitness data is turned on by default. Swipe the watch to the right to enter the fitness
data interface, and slide it down to display the current steps, distance, and calories of the
watch. The data is cleared at 12 o'clock in the morning every day.
1.8 Sports modes (strike, running, cycling, skipping rope, badminton, basketball, football)
1.8.1 Select the corresponding exercise mode, click the start button on the screen to enter
the corresponding exercise mode; click the start button of the exercise being calculated to
pause the exercise, click the end button to end the exercise and save the data.
1.8.2 The exercise data can be saved when the exercise time is greater than 1 minute; when
the exercise is saved under this condition, it will prompt "Too little data to save". (After
exiting, exercise data can only save step data)
1.9 Heart rate
Put the watch on your wrist (left/right) correctly, enter the heart rate menu, you can measure
the heart rate value in a single time, the data will be output in 10 seconds, and the measurement
will be completed in 10-20 seconds.
1.10 ECG
Put the watch on your (left/right) wrist correctly, enter the ECG menu (need to open the APP
"ECG monitor" interface), you can measure the ECG value in a single time, the data is output
in 10 seconds, and the measurement is completed in 10-20 seconds. A single ECG can be saved
in the APP synchronously, this function needs to be connected to the APP to use.
5
Tabla de contenido
